Eclipse Single Chain Spring Door Closer Polished Chrome

The Eclipse Single Chain Spring Door Closer Polished Chrome is traditionally used for internal domestic fire doors. It measures at 50mm x 25mm and comes complete with fixings and fitting instructions.

Standards/Certification

Although tested to suit 1 Hour fire doors, we would recommend that it is only used on 30 minute fire doors. For 1 hour doors we would suggest that our Nu-Matic closer is used, as the adjustment and control available is much greater.

Door Chain Restraint for Installation

Each closer comes boxed with fixing screws a chain restraint and full fitting instructions. The single chain closer is suitable for doors up to 900mm wide weighing no more than 40Kg.

Other Variations

This door closer has a polished chrome finish; there is also a polished brass version available and can be found in the related products.

How to Fit Door Closer

Select the best fitting position for your door. Cylinder - mark inner door edge for drilling of 26mm diameter hole. It is important that the hole should be not less than 147mm deep. Cylinder Plate - Mark out and recess cylinder plate flush with door edge. Insert cylinder ensuring that it is free and fix plate with screws provided. Adjust spring tension if necessary. Close door gently so that anchor plate marks out door jamb. Anchor Plate - Turn anchor plate 90 degrees to cylinder plate. Withdraw to approximately 38mm and insert template. Template - Insert template between chain links. Release anchor plate so that it is freely suspended. Recess anchor plate as for cylinder plate and fix with screws supplied.

INSTRUCTIONS ARE INCLUDED IN YOUR PURCHASE!