Sold in SINGLES. Jig requires:
A portable plunge router with 12. Engraved lines for short 65mm bolts and worktop cross-cut. 7mm (1/2 inch) shank capacity and minimum 1300 watts. Pins made from ABS plastic for strength. Three open-ended bolt recesses (dog bone style) for 150mm bolts. Two clamps. 10mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. A template guide bush with 30mm outside diameter ref. Cuts up to 40mm thick worktops with or without anti-drip postformed edge. Left hand and right hand corners, 400mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100mm radius corner, 40mm radius corner, 35mm kitchen door hole and 3/4inch BSP hole for mixer taps. The Trend CraftPro Trade work top jig for up to 700mm worktops
Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up. GB30. Engraved markings for identification of pin holes. Fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm wide worktops. A TCT router cutter with 12. 7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
Dimensions
Dimensions: 985mm x 390mm x 12mm Weight: 5.4Kg
Delivery
2 – 3 Working Days
NOTE: If your order contains a mix of products they will be despatched altogether. The delivery will be determined by the product with the longest delivery time. For more info see delivery page.
