Description
These spindles are a standard 8mm square, so either measure your existing spindle or measure the follower of the latch or lock you wish to use this spindle with. If you will be purchasing this spindle to replace an old spindle, or work with existing door handles, please check carefully whether it will be compatible with your handles or latch. These door handle spindles are available in two sizes: 100mm and 140mm. Please note: the colour may vary from that shown in the picture. Standard 8mm Door Spindles SP7, from Carlisle Brass. If you would like to find out more about how to choose the correct spindle for your doors, please follow this link to our article on the subject. These replacement Spindles are standard 8mm square sections, which will work with any 8mm latch or lock follower. This spindle can be used with most modern door handles and door knobs with an 8mm locator hole. Supplied in SINGLES.You may also like...
Carlisle Brass Lytham Door Handle on Backplate - Pair
From
£33.38
RRP
£41.21
Carlisle Brass Wing Victorian Door Handle on Rose - Pair
From
£29.47
RRP
£36.38
Carlisle Brass Spare Turn and Release for Door Handles on Backplate
From
£6.77
RRP
£8.35
Carlisle Brass Fixed Taylor Spindle
From
£1.62
RRP
£1.94
From The Anvil Taylors Spindles
From
£4.20
RRP
£5.26
Carlisle Brass Spare Screws to Suit Door Handles
From
£1.94
RRP
£2.40