Description
The manually operated pull-out corner storage unit is designed to make efficient use of that often inaccessible corner area of any kitchen corner unit. The first set of baskets come out from the unit on full extension runners and then pivot to one side to allow access to the rear baskets. The rear baskets are then accessed by sliding them along on two way universal runners attached to the back of the cabinet.
Chrome Plated Steel Baskets
The hanging frames are made from tubular steel which are silver epoxy coated to protect them and the baskets; 3 for the side hanging frame and 2 for the rear hanging frame, are made from steel, polished chrome plated, for protection.
The Complete Set
The complete corner pull-out unit, comprises of one pivoting side frame, one rear frame with a pull handle, 3 side baskets; 365mm x 470mm x 95mm high and 2 rear baskets 365mm x 470mm x 125mm high.
Simple to Install
So long as you have a depth of at least 510 mm to install the side hanging frame and a solid rear panel in the corner unit, that will accept the rear hanging frame, the complete pull-out corner unit can be installed successfully, by any competent DIYer, in under 60 minutes. As this is an item normally purchased by bespoke kitchen manufactures, limited fitting instructions are included and you may have to provide some screws to fix the runners inside the cabinet.